Skip to main content

How do I factory reset the Pro Controller?

How to perform a factory reset on the ONMO+ Pro Controller to clear all pairings.

Written by Ivan

To perform a factory reset:

  1. Locate the small Reset hole on the back of the controller (near the M1 / M2 buttons).

  2. Insert a pin, paperclip, or SIM ejector tool into the reset hole.

  3. Hold for 5 seconds until the controller resets — the LEDs will flash briefly.

  4. After the reset, all previous pairing data is cleared. You will need to re-pair the controller with your device from scratch.

Did this answer your question?